5 Best ProPress Tool Review in 2021 – New Edition

Best ProPress Tool Review

LAST UPDATED: January 14th, 2021

As an Amazon Associate, I earn from qualifying purchases

Doesn’t matter if you’re an expert in-house plumber or someone learning the art of plumbing- one thing is for sure; you must have a press tool for pipe maintenance.

There’s no way out of it unless you want to call a plumber and pay him every time something goes wrong with the pipe in your kitchen or your washroom.

The problem is, press tools, especially ProPress tools, don’t come in cheap. You only buy them once and keep them for almost a lifetime- so it is crucial that you make the right choice while choosing the press tool for you.

Therefore, you need to know the prerequisite and the feasible options available before finally agreeing on a suitable tool.

Propress Tool Comparison in 2021

Last update on 2021-01-26 / Affiliate links / Images from Amazon Product Advertising API

5 Best Press Tool Review

Luckily enough, we happen to have your work cut out for you. All you need to do is go through these five amazing ProPress tools and choose one according to your preferences!

Milwaukee 2473-22 M12 Force Logic Press Tool Kit

Milwaukee 2473-22 M12 Force Logic Press Tool Kit

If you’ve had enough with soldering, moving on to a more modern ProPress system is your best bet. And for that, it’s always safe to try a mid-range product that you can pull off with just one hand.

The Milwaukee M12 Force Logic Press is a budget-friendly tool you can use for repiping residential and commercial buildings alike.
Weighing as light as 3.8 pounds, you can fix copper fittings all day without breaking a sweat. We especially like the Milwaukee M12 because of how weightless it feels compared to soldering guns.

You also don’t have to deal with solder balls and oxidized metals. Besides, the flexibility that a Pro Press system brings could seriously be the one thing you like about plumbing.

Its service interval is a decent 32,000 crimp, and we think it’s enough to cover maintenance costs for a long time. Although, if you’re eyeing the Milwaukee M18 Force Logic, the cycle might be a letdown at first.

However, the Milwaukee M12 has a smart indicator that notifies you when calibration is needed. After you have made a secured connection with the pipe, the tool signals in the affirmative.

Its 5400 lbs. press force ensures a quick 5-second cycle time. And the fact that it’s a flameless operation, you can now save a good amount of time in installing a copper pipe at home.

This 12-volt press tool delivers an average of 40 crimps on a new lithium-ion battery. There’s also an AC option for corded use.
Another reason why we think you should totally get this cordless plumbing machine is that it comes with three locking jaw pliers. The jaws are in ½”, ¾”, and 1″ sizes, which, if you think about it, are better for home use than business use.


  • Weighs only 3.8 pounds
  • Suitable for thin pipes from ½” to 1″
  • Comes with 3 jaws
  • Decent battery life


  • Not ideal for installing heavy pipes

Latest Guide: Milwaukee Press Tool Review

Milwaukee 2773-22 M18 Force Logic 1/2″ – 2″ Press Tool Kit

Milwaukee 2773-22 M18 Force Logic

Whether you service residential water systems or repair pipes in commercial areas, the Milwaukee M18 Force Logic press tool kit can hardly escape your conversation with a fellow plumber.

Mostly because it has the best service duration at this moment in time, there are very few press tools out there that could beat the Milwaukee M18 at its game.

Its inlined design allows for better access to tight, hard-to-reach areas in the ceiling. This one is the first brushless press tool by Milwaukee.

The ergonomic shape of the device makes a one-handed operation so much easier. It is also equipped with a ton of useful features, such as a battery check.

Basically, it checks the battery level before a press so that the device could never stop in the middle of a press. Moreover, the Milwaukee M18 has excellent press accuracy compared to copper soldering systems and some top-rated Pro Press tools in the market.

The fact that it comes with not three but six different jaws was enough to have us sold on this super handy tool. The sizes being ½”, ¾”, 1″, 1-¼”, 1-½” and 2″, the M18 Force Logic offers you to work with versatile workpieces with the same press tool.
From massive sewage pipes to narrow water systems, there’s no pipe too big for the Milwaukee M18.

Although, the tool itself is surprisingly lightweight compared to the robust RIDGID ones. It’s such a cool advantage when it comes to repairing leaks under floorboards or behind the walls.

But what truly piqued our interest in this specific press tool is its unbelievable service cycle. It goes beyond the average 42,000 cycle count and scores an all-time high of 50,000 cycles.


  • Includes 6 jaws from ½” to 2″
  • Features a precautionary battery check for completely every cycle
  • Brushless press tool for one-hand use
  • Comes with lithium-ion batteries and a sturdy toolbox


  • Not suitable for crimping refrigerant lines in HVAC

RIDGID RP 340-B Press Tool Kit

RIDGID RP 340-B Press Tool Kit

Although the battle of excellence between a RIDGID and a Milwaukee is still on, you sure can check out the high-end RP 340 B to be on the safe side. It makes repairing copper pipes and installing stainless steel tubing the easiest.

Since it’s compatible with all RIDGID attachments, you can level up or level down your plumbing gear to fit the job.
For starters, this RIDGID press tool includes two 18-volt lithium-ion batteries, a charger, standard ½”. ¾”, 1″, 1-¼”, 1-½” and finally, a 2″ jaw in the carrying case. So, you get a total of 6 jaws for various plumbing requirements.

You can switch between AC power and battery power- whichever fits your occasion. Besides, the LED work light comes in handy while working in critical, low-light conditions.

Seriously though, when you’re responding to a plumbing service call at a house, you don’t know what to expect. It’s quite hard to tell where the problem is upfront.

Luckily for you, the cordless RIDGID RP 340B tool features an LED display. It shows you indications such as low battery alerts, open jaw mounting pins, improper temperature, and calibration to help your cause.

If it’s a commercial repiping, you can use mega press adapters for a thick copper pipe, gas line, or PEX tube. We also noticed how strong its hydraulic output is.

The RP 340B has a brilliant press force of 7200 pounds, which is pretty impressive for a cordless tool that is 17% lighter than its predecessor.


  • 42,000 service interval and a 4-second cycle time
  • LED work light and display
  • Ideal for joining stainless steel, copper, and PEX
  • ½” to 2″ pressing jaw capacity


  • Expensive

Related Article: Ridgid ProPress Tool Review

Ridgid 57373 RP 241 Press Tool Kit

Ridgid 57373 RP 241 Press Tool Kit

Featuring a 10% lighter and 25% smaller construction, the RIDGID 57373 is one of the finest tools for plumbing under two thousand bucks. It can go all the way up to 1-¼” on both a stainless steel and copper tube, up to 1.5″ on PEX, and ¾” on black iron.

This small throw press tool kit has all you need to step up your plumbing game. Its smart inline design is slim enough to fit in small areas. You can easily operate this cordless plumbing tool with one arm, keeping the other one free.

But, truth be told, we have seen lighter small throw tools for PEX crimp, black iron, and stainless steel pipe fittings. A 5.2lbs weight on a pro press tool for home repairs is a bit too much for some plumbers.

It’s not that tough to decide whether this RIDGID RP is any better than the Milwaukee M12. Although they share a very similar price point, the RIDGID gives you more than 140 crimps on a full charge, keeping the 3200 service cycle interval the same.

The best part is- the tool will send important crimping updates on your phone via its brand-new Bluetooth technology. It’s a smart alternative to the RIDGID RP 340-B, where an LED display showed it all. Well, guess what? The RIDGID RP 241 has it too.


  • Bluetooth connectivity for sending tool status to your smartphone app
  • 140+ crimps on a full battery
  • Compatible with copper, PEX, and stainless tube water, gas, and refrigerant lines
  • High-quality storage case


  • Can be a bit weighty for some

RIDGID RP 200-B Compact Press Tool Kit

RIDGID RP 200-B Compact Press Tool Kit

It’s time you should say goodbye to your old solder kits because RIDGID has a well-priced hydraulic crimping machine to solve your plumbing plights! The RP 200B offers a reliable technique to join copper tubes, stainless steel liners, and plastic PEX ducts.

Unlike soldering, the pro press tool creates uniform, watertight joints in a matter of 5 seconds. Besides, the fact that you don’t have to drain the water lines before repiping is a big relief. This RIDGID RP 200B is an awesome cordless crimping tool you can use for daily repairs.

The repiping quality will be far better with a pro press system than your typical soldering system. You also don’t have to use open flames, take care of spatters or solder balls. So, maintenance is really not an issue with the RIDGID RP 200B.

When it comes to joining a copper tube at home, its pro press jaws can go up to 1-¼ inches with an incredible force. Its two 18V lithium-ion batteries have the ability to deliver 250 presses and more on a full charge. You can wrap up small to big plumbing errands in the shortest amount of time.

Ensuring watertight seals and strong pipe fittings is something the RP 200B does with excellence. Its tool barrel swivels at 270° for an effortless crimping session regardless of the space.

Moreover, the 4-5 second cycle is enough to provide a good speed. However, the 5,400 lbs. press force might disappoint you; but only if you’re used to driving superior power tools such as the RIDGID RP 340-B.


  • Provides 250+ crimps per session
  • ½” to 1-¼” jaws for stainless steel and copper
  • Also suitable for PEX tubes
  • Long battery life


  • Average hydraulic ram output

What to Look for Before Buying a best press tool

ProPress tool isn’t something everyone has good knowledge about. Considering the resurgence of the good and bad quality tools in the market, you need to check a few things before picking one for you. We have that sorted out as well!


Propress Tool performance

First things first, these tools don’t come in very cheap, so you have to make sure they give you the best service available. There are a few criteria as to what makes a decent, stellar performance for ProPress tools.

The service interval duration needs to have long cycles. For example, Rigid-340 has the highest, a total of 42,000 cycles.
But that’s not only it.

The power depends on hydraulic ram output as well. If you don’t get the preferred power or cannot efficiently do the job, then there’s no point buying a tool like this, no?

This is why you need at least 5000 ram force and a maximum cycle time of 5 seconds. With these features, your tool would surely be efficient and useful.


Durability remains a very common concern because most people who buy a ProPress tool would prefer not to buy it again for a long time. Fortunately enough, most of these tools are made in a sturdy, durable way and can actually last long.

Then again, you should give a good check on the battery life- because that is the thing most likely to decay with time.


This is a crucial issue for most people out there unless you’re a multi-millionaire and just want to show off your plumbing skills! Jokes apart, ProPress tools have a lot of features in them and are quite expensive accordingly. The price varies from brand to brand, and considering their features- it gives you a wide range of options.

The most inexpensive ones on our list would be available for around $600, while you might have to bring out more than $3500 for some premium quality pressing tool.

Obviously, the expensive ones are more powerful and have better features, but make sure what your preference is and if a relatively inexpensive one can do the job for you or not. That should do.


You need to check a good lot of things when we add specifications to the list. The first thing would be the weight, because if you want to carry the box around your house- you need it to be lightweight.

Second, you’d want your precious little ProPress tool to be compatible with other tools available. You’re spending enough on this one, why spend more on other accessories?

Next up is the cordless feature. You surely won’t want to move around with wires and cords attached to the tool, right? This is why a cordless tool alongside a display indicator is so on demand.

Another thing to keep in check is the charging time. Easy installation is a prerequisite these days on similar products, so you need to keep that in check. Last but not least- if possible, make sure the tool doesn’t require calibration intervals while you’re working.

Frequently Asked Questions

How long can ProPress fittings last?

ProPress fittings, mostly copper fittings, last for a long, long time. Some of the top tools come with as much as a 50-year warranty on their pipe fittings.

Now, this doesn’t mean that the pipe will wear off after 50 years; there are tons of fittings that last way longer than that. Overall, ProPress fittings are meant to last for a really long time.

Is it possible to repress a ProPress fitting?

It’s very difficult to repress a fitting once it is fully done. Because after fitting, it becomes a sturdy, solid piece that will remain this way for a long time.

However, even if the fitting moves a bit over time, you don’t really need to repress it; this is a part of the design and will not hamper the pipe in any way.

What do you mean by press-fitting technology?

There are two basic processes for joining two tubes: the soldering, the other is the press-fitting.
Soldering requires solvent or torches to heat them up and make a permanent seal, whereas press-fitting is a fully mechanical method where you can use the tool to have a permanent copper or steel seal. This is a fairly new process, came to light in the mid-’90s.

ProPress or Solder- which one is better?

ProPress system is safer and more efficient than that of solder. The main problem of soldering is the fire- because the open flame is dangerous, and it requires a hot work permit as well.

This whole process is time-consuming, and the preferred area needs to be drained and dried beforehand. With a ProPress tool, these aren’t a concern at all-so we would say the ProPress tool gets the edge!

ProPress fittings are suitable for what temperature?

The NSF international did a few tests on ProPress tool fittings regarding safety, pressure, and potable water. These results came all positive, and it has been declared that the fitting can withstand any temperature from 0° to 250° F.

Final Words

We’re pretty sure at this point you’re convinced; being a plumber is easier said than done, but the work seems quite fun with a ProPress tool! These are modern inventions that can help you ease off that extra financial pressure from your plumber- so why not go for it?

We hope you can find the propress tool that suits your preference and your work. Best of luck!

Leave A Reply

Please enter your comment!
Please enter your name here